A long overdue update

This was intended to be the post for our March 1st build session. I'm a bit late, eh?

So this post is going to cover the work on the session on the 15th also . . .

So here's the short update: We've actually settled into something resembling productivity at these build sessions. A bunch of the guys worked on making more of the misc little pieces out of MDF. We now have enough of them that I'm going to have to sit down at the next meeting on Monday and do some sorting and labeling, just so we know what needs to be done. Unfortunately,we're going to have to start working on the hard pieces now. (The big ones, with lots of angles and holes.)

Michael has been busy working on the various electronics (the AVR programmer and the three optostop boards), and I think they are finished and tested.

Those of us with experience in Pro/Engineer are translating the PAR files into solid models that we can modify ourselves. Adam, Devin, Branko, and I have been working through these at a reasonable rate. We have enough parts that I am starting to build some of the sub-assemblies. (I'll post pictures as they are done.)

Here's the agendas for the last two sessions. I'm going to start posting the session agendas along with the updates, just so that interested parties can figure out what we are currently working on.

-----------------------------

3/15/10 Meeting

Prep:

• Order Pizza & arrange for beer
• Make sure we have appropriate numbers of sketches

Admin:

• C-Rap can
• Set next meeting: 03/29/2010
• Distribute tasks

Mechanical:

• Continue modeling pieces in Pro/E
  
• Modify part designs for work with plywood
• Start building pro/e assembly
• Continue cutting plywood blocks
• Mill vertexes to correct thickness
• Drill out-of-plane holes
• Start making other parts
• Order Bearings

Electrical:

• Assemble and test programmer
• Finalize other board designs in preparation for ordering other boards (Interested in electronics layout? Check this out?)
• Order parts for motherboard

Software:

• Note: Most software stuff tabled until electronics are assembled
• Create sketch outlines

Recycler

• Decide what we want this thing to do.
• Generate potential designs and processes.

-------------------------

3/1/10 Meeting

Prep:

• Order Pizza
• Make sure we have appropriate numbers of sketches

Admin:

• C-Rap can
• Set Next meeting
• Assign people to tasks

Mechanical:

• Start modeling pieces in Pro/E (up to three people. Perhaps: Ben, Devin, Adam S?)
  
• Cut final rod to length
• Continue cutting plywood blocks
• Cut out vertexes
• Mill vertexes to correct thickness
• Mill out-of-plane holes
• Order Bearings

Electrical:

• Assemble programmer
• Assemble optostops
• Finalize other board designs in preparation for ordering other boards
• Order parts for motherboard

Software:

• Create sketch outlines

Recycler

• Have BrainSturm session to generate design ideas
• Get Cracking